Description

Mazak Integrex e-1850V/12 II CNC MultiTasking Machine – Year 2011
Nbr of pallets 2
Axis X 3055 mm
Axis Y 1850 mm
Axis Z 1800 mm
CNC Mazatrol Matrix
Max. part weight 7000 kg
Number of tool pockets 80
Spindle rotation speed 10000 rpm
Length x width x height 6752.0 × 11238.0 × 5760.0
Weight 60000 kg
Maximum workpiece diameter : 2,350 mm
Maximum workpiece height : 1,800 mm
X axis stroke : 3,055 mm
Y axis stroke : 1,850 mm
Z axis stroke : 1,800 mm
B axis stroke : 150º
C axis stroke : ± 360º

Distance from centre of B axis rotation to centre of pallet : 2,130 mm
Distance from spindle nose to centre of pallet : 1,830 mm
Distance from centre of B axis rotation to top surface of pallet : 100-1,900 mm
Distance from spindle nose to top surface of pallet : -200-1,600 mm
Pallet load (evenly loaded) : 7,000 kgf

MILL SPINDLE
Mill spindle nose type : 7/24 taper, No 50
Mill spindle speed : 35-10,000 rpm
Number of mill spindle speed change ranges : 2 steps (electric)
ID of mill spindle bearing : 100 mm
Mill spindle drive motor : 30 min rating – 37kW
Continuous rating – 30kW
Mill spindle index : 5º clamp
FEEDRATE
Rapid traverse (X, Y, Z axis) : 40,000 mm/min
Cutting feedrate (X, Y, Z axis) : 40,000 mm/min
B axis tilting speed : 30 rpm
C axis rotation speed : 6.7 rpm

TABLE
Turning operation spindle – spindle speed : 5-250 rpm
Number of spindle speed change ranges : 2 steps (electric)
Spindle drive motor : 30 min rating – 45kW
Continuous rating – 37 kW
Pallet change time : 50 seconds
Repeatability in pallet changes : within ± 5µm
Mutual differences in pallet changes : within 15µm
Table indexing : 0.0001º x 3,600,000 positions (NC rotary)
Pallet top surface height (from floor level) : 1,600 mm

ATC TOOL MAGAZINE
Tool storage capacity : 80
Tool selection system : fixed address of the magazine, auto short path selection
Tool shank type : CAT50
Retention bolt type : Yamazaki ANSI type
Maximum dia of tool in magazine : with adjacent tools – Ø 135 mm
without adjacent tools – Ø 260 mm
Maximum tool length : 650 mm
Maximum weight of tool : 30 kgf
Tool change time (chip to chip) : 8.5 seconds

TANKS
Lubricating oil tank capacity : 3 litres
Spindle cooling fluid tank capacity : 70 litres
Hydraulic unit tank capacity : 46 litres
Table lubrication tank capacity : 20 litres
Coolant tank capacity : 1,300 litres

MACHINE DIMENSIONS

Height : 5,760 mm
Width : 6,752 mm
Depth : 11,238 mm
Weight : approx 60,000 kgf

POWER SOURCE
Voltage (3 phases) 220/220V ± 10%
380/400/415/440V ± 10%
460/480V ± 10%
Frequency : 50/60Hz
Capacity : 30 min rating – 141kVA
Continuous rating – 128kVA

AIR SOURCE
Pressure : 0.5-0.9MPa
Capacity : 550 litres/min