Description

MCM CLOCK 700 MP18 – Year 2010
CNC Horizontal Machining Center
TECHNICAL DETAILS
X / Y / Z travel: 700 / 675 / 700
C-axis: 360
Indexing: 0.0001°
Spindle speed: 20,000 rpm
Control: CNC FANUC 16-M composition MCM/HPC CLOCK

Tool holder: HSK-A63 (PEM 000120 / 75 HV, complete with tool balance control)
Tool changer: HSK-A63 tool rack with tool buffer for fast regeneration
Tool magazine: 295 slots

Pallet: 500 x 500 mm, two-level multiple pallet
Workpiece weight: 600 kg
Rotation surface in the work area: Ø 790 mm
Total number of pallets: 18 pieces
Pallet changer: 2-position, rotating storage area  800 mm
Two-stage storage positions: 14 pieces
Loading/unloading positions: 1 piece
Pallet manipulator: detached from exchanger, 2 positions
Pallet change time: 12 s

EQUIPMENT
Cooling unit for conditioning the spindle
Spindle with coolant supply through the tool center
Washing system for the work area for chip extraction
Apron conveyor for chips with liquid
Coolant tank with a capacity of 1,500 liters

SPECIAL EQUIPMENT
C502 Sealed upper guard prepared for connection to a central fume extraction system
C508 Sealed guard – Armored machine guard for high-speed machining.
C301 Workpiece washing – Automatic washing of workpieces, which can be controlled with an M function as required and is realized with a series of lance nozzles
C303 Tool cone washing – Tool cone washing device, driven by high pressure coolant, controlled by an M function.
C305 Oil separator – Oil separator for recovering oil in suspension after the machine has been switched off.
C407 Inductive sensor for thermal compensation on the electrospindle – Sensor for measuring spindle elongation along the Z-axis as a function of temperature.
C410 Tool monitoring MCM – System for recording the power consumed at the spindle. Minimum resolution ± 100 W. Logical management of three power levels
C308 High pressure 65 bar – Coolant at 65 bar through the tool with highly efficient high pressure management with continuous variation between 10 and 65 bar.
C408 Marposs high frequency probe MIDA T25 – Marposs probe type “Mida” T25 for dimensional checks, zero point search, etc.
C403 Tool presence check by laser
C412 BALLUFF read/write – Balluff read/write system with Balluff tablets

Machine with comprehensive special equipment e.g:
C407 Inductive sensor for thermal compensation on the electrospindle
C410 Tool monitoring MCM – System for recording the power consumed by the spindle.
C308 High pressure 65 bar – Coolant at 65 bar through the tool with highly efficient high pressure management
C408 Marposs MIDA T25 high frequency probe
C403 Tool presence detection by laser

JFMX MONITORING SYSTEM
Optimized version of JFMX management software
Operating system for flexible machining cells that offers the following monitoring services
Monitoring of the plant and generation of reports
production management
High-level interface between CAD-CAM systems and machining centers.
Modem for remote support