Description
MEGABORE LD-40 – Heavy Duty Lathe
Manufacturer: MEGABORE
Model: LD-40
Condition: New – In-Stock
Description
Megabore CNC Lathe Model LD 40x120x14″ bore, 12 station turret, front and rear chucks, Fanuc control
(360mm bore x 3000mm between centres).
EX STOCK – AVAILABLE FOR IMMEDIATE DELIVERY
* One piece bed, floor type casting.
* Alloy steel spindle with opposed taper roller bearings.
* All gears in the headstock are hardened and precisely ground.
* Automatic ranges of spindle speed through pneumatic gear shift.
* Spindle speed ranges are automatically changed by M code.
* Infinitely variable speed are commanded by S code.
* Tool change are commanded by T code.
* Auto lubrication system is equipped for headstock, carriage, and cross-slide.
* Precision tapered roller bearings are equipped on the spindle and the quill.
* The quill is heat treated and precisely ground.
* Internal taper of quill to suit MT#5 dead center or live centre.
* Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
* X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
Long Description
* One piece bed, floor type casting.
* Alloy steel spindle with opposed taper roller bearings.
* All gears in the headstock are hardened and precisely ground.
* Automatic ranges of spindle speed through pneumatic gear shift.
* Spindle speed ranges are automatically changed by M code.
* Infinitely variable speed are commanded by S code.
* Tool change are commanded by T code.
* Auto lubrication system is equipped for headstock, carriage, and cross-slide.
* Precision tapered roller bearings are equipped on the spindle and the quill.
* The quill is heat treated and precisely ground.
* Internal taper of quill to suit MT#5 dead center or live centre.
* Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
* X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
BED
| Width | mm (in.) | 560 (22.04) | |||
| CARRIAGE | |||||
| Width of cross slide | mm (in.) | 350 (17.77) | |||
| TURRET | |||||
| Standard tool post | Auto 4-way / Polygon Disc / VDI disc | ||||
| No. of tool stations | H4;H6 / V12 / V8;V12 | ||||
| Turning Tool Size | mm (in.) | 32 x 32 (1.25) | |||
| Boring Tool Size(max.) | mm (in.) | 63 (2.5) | |||
| TRAVEL | |||||
| Cross slide(X axis) travel | mm (in.) | 630 (24.8) | |||
| Longitudinal(Z axis) travel | mm (in.) | 1500 (59.05), 2000 (78.74), 3000 (118.11), 4000 (157.48), 5000 (196.85), 6000 (236.22), 7000 (275.59), 8000 (314.96), 9000 (354.33), 10000 (393.70), 11000 (433.07), 12000 (472.44) |
|||
| Cutting feed rate | mm(in.)/rev | X axis : 0.001~250(0.00004~9.84) ; Z axis : 0.001~400(0.00004~15.75) | |||
| Rapid travel | M.(Ft.)/min | X axis : 6(19.68) ; Z axis : 6(19.68) | |||
| Ballscrew diameter | mm (in.) | X axis : 50(1.96) ; Z axis : 80(3.14) | |||
| TAILSTOCK | |||||
| Quill type | Built-in type, Dead tailstock quill | ||||
| Quill diameter | mm (in.) | 145(5.7) | |||
| Quill travel | mm (in.) | 200(7.87) | |||
| Internal taper of quill | MT#5 | ||||
| MOTOR | |||||
| Headstock oil refrigerator | 18,000BTU(4,500Kcal) | ||||
| Main spindle | KW(HP) | 30/37(40/50)-STD. ; 37.5/45(50/60)-OPT. | |||
| Axis servo | KW(HP) | X axis : 7(9.387) ; Z axis : 7(9.387) | |||
| Hydraulic tank | KW(HP) | 3.7(5) | |||
| Coolant pump | KW(HP) | 1.05(1.4) | |||
| Controller | FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT. | ||||
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Specifications are subject to change without notice for improvement
Specifications
Swing 40″ 1,016 mm
Centers 120″ 3,048 mm
Spindle Bore 14″ 355.6 mm
Power 40 hp 29.8 kW
Control CNC (CNC (Fanuc)) CNC (CNC (Fanuc))
Equipped With
Hydraulic positioning Tailstock NC Controlled
Oil Cooler
Multi-tapping transformer
2 x 4 Jaw steel body chucks.
Boring bar holders
3 Point steady.
