Description
MIGHTY VIPER VTL-2500MDS – Year 2020
Adjustable Cross Rail Type, with five (5) Automatic cross Rail Positions
Fanuc System 0i-TD CNC Controller
VTL-2500MDS with 18 Station Automatic Tool Changer System
9″ Square Carbon Steel Ram with 39 3/8″ Vertical Ram Travel
2 standard tool holders for OD & ID
Automatic Forced Lubrication System
Independent 78 ¾” Diameter 4-Jaw manual Chuck Table with Top Jaws
50 Horsepower x 2 30 min. rating AC Main Drive Motor for table
Telescopic Steel covers For Cross Rail
High Quality Cast Iron Construction
Coolant System and Coolant through the Ram
Chip cover / Splash Guards / Sliding Doors
One (1) Year Machine Warranty and Two (2) Year Control Warranty
With All standard Features and Accessories
Chip Conveyor System
Foundation Parts Kit One (1) Set
Table Diameter inch/mm 78.75/2,000
Distance from Spindle end to Table(lowest-highest) inch 2 ~ 68
Max. Turning Diameter inch/mm 99/2,500
Max. Swing Inch/mm 99/2,500
Max. Turning Height Inch/mm 63/1,600 (opt.)
Max. Mass of Work piece lbs/kg 63,800/29,000
Max. Torque of Table lbs-ft/NM 18,150
Max. Cutting Force Lbf /Newton 8,764/39,040
X axis Stroke Inch/mm -15.7/ +69.3 inch, -400/+1,760 mm
Z axis Stroke Inch/mm 47.2/1,200
Ram Size Inch/mm 9.06 X 9.06/230X230
Min. I.D. for Ram Pass Inch/mm 12.99/330
Rapid Traverse (X axis) inch/min 472
Rapid Traverse (Z axis) inch/min 393
Manual feed rate (X,Z axes) inch/min 141
Cutting feed per rev. inch/mm 0.0001~20 / 0.01~500
Cutting feed rate inch/min 0.04~141.75
Table Speed (2 steps) rpm 0~55; 53~200
Cross rail Stroke Inch/mm 43.3/1.100
Cross rail Step inch/mm X step 200mm x 5 step (7.874”x5)
Tool Shank Size Inch/mm 1.26 X 1.26/ 32 X 32
Max. Tool size Inch/mm For turning, I.D. & O.D. 6.89/175
Table Main Motor HP 50 HP x 2 = 100 HP
X Axis Motor (AC Servo) HP 8.0
Z Axis Motor (AC Servo) HP 8.0
Cross rail Elevating Motor HP 7.5 X 5 Position
Power Requirement KVA 75KVA/ (3 phase, 208V )/ 200AMP
Machine Weight lbs./kg 88,640/40,290
ATC Magazine Capacity Number 18
Max. Turning Tool Length inch/mm 17.72/450
Max. Drill Diameter inch/mm 1.97/50.04 ( Carbon Steel Work piece)
Max. Tap Diameter inch/mm 1.181/30 ( Carbon Steel Work piece)
Max. Torque of Drilling Ft-lbs/NM 145/196
Live Spindle Speed rpm 30-2,000
Table Index Speed ( C axis) rpm 3
Live Spindle Motor HP/kw 20/15 ( 30 min/continuous)
Tool Taper Big-Plus No. 50 (Big-Plus)
Pull stud P50T-1
Max. weight of tool holder Lbs/kg 110/50(1pc)
Dimension(LxWxH) inch/mm 208.86X 167.72 X 224.80 (287 opt.) / 5305X4260X5710 (7300 opt.)
