Description
Mitutoyo Formtracer SV-C3200 – Year 2021
Surface Roughness & Contour Measuring Instrument 200mm Drive With Extended Z
-Vice and XY Table Included
Currently setup for inspection/demo, you are welcome to come inspect this machine before purchase.
Manufacturer Catalogue ınformation about Mitutoyo Hybrid measuring instrument for
surface roughness and contour measurement :
Surface Roughness Measuring Functions
Supporting International Standards
Compliant with JIS ’82/’94/’01, ISO, ANSI, DIN, VDA, and other international surface roughness standards.
We offer a product lineup of surface roughness detectors with different measuring forces Standard detectors can be selected (as listed below) to conform to the international standard required.
0.75mN (tip angle 60°; tip radius 2μm)
Reduction of measuring time and operator’s fatigue
In addition to high speed movement of main unit, reduction of setting time and operator’s fatigue can be achieved by using Auto-leveling Table (option), which allows automatic leveling for a measuring face.
Common specifications
Fast traverse improves
measurement efficiency
X axis (drive unit) : 80mm/s (MAX) Z2 axis (column) : 30mm/s (MAX)
The total measurement time can be shortened by speeding up the traverse movements.
Remote-control unit enables safe, easy & fast measurement
The remote-control unit lets you move quickly from positioning to measurement. The unit also features an emergency stop switch and speed control knob for added safety while the machine is moving at high speeds.
Auto stop feature assures safety even during high-speed movement
The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high- speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine.
Contour Analysis Software: FORMTRACEPAK
Contour Measuring
• Contour analysis function
Upper and lower surfaces can be measured continuously by using Mitutoyo’s double-sided conical stylus.
This continuous measurement data can be used to facilitate analy- sis of features that were difficult to measure before, such as the effective diameter of an internal screw-thread.
Surface Roughness Measuring
• Surface Roughness analysis function
FORMTRACEPAK can perform surface roughness analyses that conform to various standards such as ISO, JIS ANSI, and VDA. For comparing the measurement values with the tolerance limits, you can use the 16% rule or the maximum value rule. Furthermore, since FORMTRACEPAK comes with parameter calculation functions as well as a rich set of graphic analysis functions, it can be widely utilized for everything from routine quality control to R&D applica- tions. It also includes
many other func-
tions, such as the
function for elimi-
nating (compensat-
ing) shapes, such
as slopes and R-
surface, and a data
deletion function.
• Microscopic contour analysis function
• Simple input using drawing symbols
• Multiple-point measurement function
• Analysis function using multiple-point measurement • Reference length dialog box
• Analysis condition modification with a preview function
• Contour-tolerancing function as a standard feature • Design value generation function
• Data combination function
• Simple pitch calculation function
• R-surface automatic measurement function
