MORI SEIKI NTX1000 SZ – Year 2011

Contact us for price

Category:

Description

Turning length 800 mm
Turning Ø 430 mm
Type of CNC F31iB5
X-axis 455 mm
Z-axis 800 mm
Spindle taper JIS A2-6
Spindle bore 73 mm
Number of tools on turret 10
Turning speed 5000 rpm
Spindle motor power 26 kW
Tailstock no
Bar feeder no
CNC Turning Center
Length x width x height 4170.0 × 2500.0 × 2495.0
Weight 10000 kg
Worked hours 10750 hours
Hours under power 35066 hours
State good

 

 

CNC controller: F31iB5
Capacity
Turning length mm: 800
Max. turning diameter mm: ø 430
Bar work capacity mm: 65
Turn-mill spindle

X-axis travel mm: 455
Y-axis travel mm: ±105
Z-axis travel mm: 800
B-axis degree: ±120 (0,001º)

Speed ​spindle rpm: 12.000
Tool magazine
Magazine places: 76
Tool holder: Capto C5
Tool length max. mm: 250
Tool weight max kg: 5

Lower turret
X-axis travel mm: 160
Z-axis travel mm: 730
Number of tool slots St .: 10

Main spindle
Speed ​spindle rpm: 5.000
Drive power spindle kW: 26/22
Spindle bore mm: 73
Chuck type: 8″
Spindle nose: JIS A2-6
Maximun torque Nm: 365/256

Counter spindle
Speed ​spindle rpm: 6.000
Drive power spindle kW: 11/7,5
Spindle bore mm: 61
Chuck type: 6″
Spindle nose: JIS A2-5
Maximun torque Nm: 223/172

Machine Equipment
Chip conveyor
Signal lamp
Tool measuring arm
part catcher
High pressure pump
Workarea light
CE conformity
Chuck foot switch (double) for main and counter spindle
AI Contour Control
SIMULTANEOUS 5 AXIS CONTROLL
240 Offset pairs
6 coordinated system pairs
600 custom macros
Interface for Bar feeder
Working time hours
Under power: 35.066
Spindle 1: 10.750
Spindle 2: 665

Basic machine dimensions / weight
Length mm: 4.170
Width mm: 2.500
Height mm: 2.495
Weight kg: 10.000

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark
     or  Wire  Transfer  or   Credit Card


Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 

1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.