Description
Nakamura Tome WT-150 II – Year 2016
CNC Turning Center
| Manufacturer | Nakamura Tome |
| Model | WT-150 II |
| Year | 2016 |
| Condition | Used |
| Nakamura Tome WT-150 II | CNC Turning Center |
| Control | Fanuc 31iB |
| Chuck Sizes Main / Subspindle | Collet / 6″ 3 jaw Hydraulic & Collet |
| Maximum Turning Diameter | 7.48″ |
| Maximum Turning Length | 20.3″ |
| Distance Between Spindles | 7.87″ – 29.6″ |
| Maximum Bar Capacity Left Spindle / Right Spindle | 2.05″ / 2.05″ |
| X1 / X2 Axis Travel | 6.59″ / 6.59″ |
| Y-Axis Travel Upper Turret | +/- 1.38″ |
| Z1 / Z2 Axis Travel | 20.3″ / 20.3″ |
| B-Axis Travel – Subspindle | 23.7″ |
| C Axis Spindle Rotation – Both Spindles | 0.001 degree |
| Number of Turrets | 2 Turrets |
| Number of Turret Positions | 12 Stations / 24 Positions – Both |
| Main Spindle Nose / Subspindle Nose | A2-6″ / A2-5″ |
| Spindle Speed / Spindle Motor Left Spindle | 4,500 RPM / 20 HP |
| Spindle Speed / Spindle Motor Right Spindle | 5,000 RPM / 15 HP |
| Milling Spindle Speed / Milling Motor | 6,000 RPM / 7.37 HP |
| Machine Dimensions | 142″ x 78″ x 73″ |
| Machine Weight | 19,600 lbs. |
(1) 12 Position Upper Turret – Live Tools – Y Axis
(1) Lower Turret with 12 Positions – Live Tools Twin Spindle Design
Y Axis Capability on Upper Turret Only Full C Axis on Both Spindles Live Milling/Drilling Capability
Subspindle
Hainbuch Spanntop 65mm Mini Combi Pull Back Collet Chuck on Main Spindle
Hainbuch Spanntop 65 Dead Length Collet Chuck for Sub Spindle Kitagawa 6″ 3-Jaw Hydraulic Chuck on Sub Spindle
LNS Quick Load Servo S3T Short Magazine Barfeeder Parts Catcher A for Left Spindle
Parts Catcher G for Right Spindle Chip Conveyor Chip Blaster JV40 1000 PSI High Pressure Coolant System
Chip Blaster Mist Blaster 300 CFM Mist Colletor
Removable Tool Setter
All Available Tool Holders
All Available Manuals Power On Hours 26,362
Run Hours 15,353
