Description
Okamoto OGM-12-60P Plain Cylindrical Grinder – Year 1994
Capacity:
Swing Over Table ………….. 12.6″
Max. Dia. To be Ground …….. 12″
Distance Between Centers:…… 60″
Max. Weight Between Centers … 330 Lbs.
Grinding Wheel:
Max. Grinding Wheel Size:…… 20” x 3” x 8”
R.P.M ……………………. 1,625 RPM
Wheelhead:
Wheelhead, Stroke (X-axis) …. 8″
Wheelhead Swivels …………. N.A.
Wheelhead Automatic Infeed …. 0.00001″ to 0.002″
Rapid Feedrate ……………. 157″ IPM
Manual Pulse Generator …….. 0.00001″, 0.0001″, 0.001″
Wheelhead Power Rapid Stroke .. 1.5″
Grinding Wheel Spindle Motor .. 7.5 HP
Table:
Max. Table Travel …………. 65.6″
Table Swivel ……………… + to – 6°
Power Table Traverse Speed …. 0 to 390″ IPM
Manual Pulse Generator …….. 0.00001″, 0.0001″, 0.001″
Table Feed Motor:………….. 1.2H.P. AC Servo
Workhead:
Work Head Center Taper:…….. MT #4
Work Head Spindle Motor:……. 1.0 HP AC Servo
Work Head Spindle Speed:……. 10 – 500 RPM
Work Head Swivel Angle:…….. N.A.
Tailstock Taper:…………… MT #4
Spindle stroke ……………. 1.2”
Machine Weight:……………. 9,950 lbs.
Approx. Floor Space ……….. 188” x 74” x 64”H
Machine Features:
Fanuc MDI Control, CRT Display, With Automatic
Program Cycles (See Description Above)
Minimum Increment 0.00001″ (DIA.) Std.
Manual Pulse Generator Handwheel
Fanuc Red Cap Servo Motors for the Axis Movements
Ball Screws (No Hydraulics)
Low Friction Material is Applied to the
Sliding Surfaces of Slide Table & Wheelhead
Automatic Lubrication System
Workhead Spindle is Both “Live” & “Dead”
Equipped with:
Electronic Automatic Wheel Balancing Unit,
this is an Expensive Option
Center in Workhead
Dial Indicator for Table Swivel
Coolant System with Both Paper Filtration
and a Magnetic Separator
Dresser
(3) Two-Point Rests
(2) 3-Point Steady Rests
Assortment of Centers
Lifting Device to Switch Out Wheels
Extra Wheel Hub
Tool Box
Drive Dog Set
Many Extra Grinding Wheels, Superb Condition
Optional 20″ Diameter, Up to 3″ Wide,
with 8″ Bore Grinding Wheel Size.
Also Comes with 16″ Diameter Wheels
Wired Presently for 3/60/220 Volts
Exceptional Condition & Appearance – Original Paint
Purchased from a Non-Profit Teaching Program
Inspect Under Power our Warehouse
12″ Swg 60″ cc Okamoto OGM-12-60P, FANUC MDI CONTROL, AC SERVO DRIVES, OD GRINDE
12″ Swing 60″ Centers Okamoto OGM-12-60P, FANUC MDI CONTROL, AC SERVO DRIVES, OD GRINDER, COOLANT, M
12.6″ X 26″ OKAMOTO Model OGM-1260P
“PLAIN” CYLINDRICAL GRINDER
Okamoto/FANUC MDI Control,
Featuring Automatic Cycle,
Including Dressing with Dress
& Wheel Wear Compensation
S/N: 12002 New: 1994
“The OGM MDI Series Control:
“User friendly” with powerful teach function.
Data input is so simple .
Dress Interrupt Function, for on demand
wheel dressing at any point during the grind cycle.
The OGM will automatically stop its infeed, dress,
and return to the exact point where the interruption
occurred and resume grinding.
In addition, a Cycle Skip Function allows the operator
to skip the dress and roughing cycles and proceed
directly to finish grnd plus size compensation.”
Choose from 4 versatile grinding cycles.
– (1) Plunge for rapid stock removal
– (2) Shift-Plunge / Traverse for fast stock removal and fine finish
– (3) Traverse with in feed at right end, left end or
both ends for fine finish
– (4) Manual Traverse that eliminates the need for program input
– saves time – ideal for single workpiece requirements”
The OGM’ s Servo Driven Wheelhead is designed to
withstand the rigors of high volume production work,
yet deliver consistent fine finish capability to “tenths”.
Its built-in rapid advance/ retract simplifies set-up
– a real convenience feature.
The wheelhead incorporates a cartridge type wheelspindle
(Iubed for life) that provides the utmost in reliability
and ease of maintenance.
