• Okuma Captain L370 CNC Lathe – Year 2010

    Contact us for price

    Category:

    Description

    Okuma Captain L370 CNC Lathe – Year 2010
    Max Swing Over Bed 20.8″
    Max Swing Over Saddle 16.53″
    Max Turning Diameter 14.56″
    Chuck Size 8″ 3-Jaw
    Max Turning Length 19.68″
    X-Axis (Cross Travel) 10.23″
    Z-Axis (Longitudinal Travel) 20.47″
    X-Axis Feed Rates 0.00004 – 39.37 IPM
    X-Axis Rapid Traverse Rate 787 IPM
    Z-Axis Feed Rates 0.00004 – 39.37 IPM
    Z-Axis Rapid Traverse Rate 984 IPM
    # Tool Turrets 1
    Tool Turret Positions 12 Total
    Spindle Nose A2-6
    Spindle Bore 2.44″
    Spindle Speed Range 45 – 4,500 RPM
    Spindle Horsepower 20 HP
    Tailstock Quill Travel 4.72″
    Tailstock Quill Diameter 3.54″
    Electrics 220/3/60
    Approximate Machine Dimensions 86.61″ x 67.72″
    Approximate Machine Weight 9,240 LBS
    CONDITION: This Machine Appears to be in Very Good Condition

    EQUIPPED WITH:
    Okuma OSP-P200L CNC Control, 8″ Kitagawa B-208 3-Jaw Hydraulic Chuck, 4500 RPM Spindle, 2.33″ Through Hole, 12 Position Golden Sun CLT-200 ID/OD Tool Turret, Henning KMM-1304-03 Chip Conveyor.

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products