OKUMA LB35II – Year 1996

Contact us for price

Category:

Description

OKUMA LB35II – Year 1996
CNC LATHE

Machine Serial No.: Unknown
Machine Model No.: LB35II
New Date: 1996

Standard Machining Diameter: 13.78″
Maximum Machining Diameter: 18.11″
Distance Between Centers: 59″ Maximum
Swing Over Saddle: 16.93″
Spindle Speeds: Up to 3200 RPM
Spindle Nose Type: A2-8
Spindle Motor: 40/30 HP
Tool Turret Type: V12 Fixed Tool For Lathe
Tailstock Taper: #5 Morse
Okuma OSP 7000L CNC Control
OSP One Touch 1GF-L Software with Manuals

EQUIPPED WITH:
8″ Roller Type Steady Rest with Lincoln Grease Lubrication System (requires compressed air)
Steady Rest is Manually Positional
Tailstock is Manually Positional via Towing with the Tool Carriage

(1) 12″ Kitagawa B212, 3 Jaw Hydraulic Chuck with Fine Serration Master Jaws and Bolt on Top Jaws
(1) Advanced Tool Systems Collect Chuck System, #A8-S30H-BB with Assorted S30 Collect Pads
(1) Live and (1) Bull Nose and (1) Dead Centers All with #5 Morse Taper
(4) Turning Tool Holders
(5) Boring Bar Type Tool Holders
(5) Boring Bar Bushings

Assorted Wrenches, Splash Guards, Cast Iron Machine Mounting Pads
Slat Type Chip Conveyor with built in Coolant Tank System
Forward – Reverse – Stop Operation for Chip Conveyor
Machine is Factory Wired For 220 Volt Operation
Machine Has Internal Multi Tap Transformer for the Following Connections: 220/240/380/415/440/480 Volts
Full Load Amps: 99.3 / 49.7
Built in Hydraulic System Tank
Approx. Maximum Distance Face of Chuck to Tailstock Quill Face: 64″ (no center in quill)
Separate Adjustable Hydraulic Pressure Controls for Chuck and Tailstock Quill
Has a Full Set of OEM Manuals and Schematics and 3-1/2″ Computer Disk Backups
Overall Size: Machine w/o Chip Conveyor: 192″ LR x 99″ FB x 90″ High (on 4″ Blocks) x 28,000 Lbs. Approx.
Chip Conveyor / Coolant System: 172″ Long x 51″ Wide x 75″ High x 1,000 Lbs. Approx.
Skid of Tooling and Miscellaneous: 28″ x 28″ x High x Lbs.

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products