Okuma MacTurn 550 – Year 2004

Contact us for price

Category:

Description

Okuma MacTurn 550 – Year 2004
CNC MultiTasking Machine

CNC Control yes
Type of CNC Control OSP-E100L
Chuck Size 15 inches
Swing 28.35 inches
Turning Diameter 28.35 inches
Center Distance 126.67 inches
Bar Capacity 4.5 inches
X Axis Travel 25.98 inches
X2 Travel 9.06 inches
Z Axis Travel 126.57 inches
Z2 Travel 122.05 inches
Y-Axis Travel 9.84″
C1/C2 Axis Index 0.001°
B Axis Head Tilt 210° Degrees
Y Axis yes
Spindle Nose A2-11
Spindle Speed 3,000 rpm
Main Motor 40 hp
Live Tooling yes
Live Tooling Spindle Taper HSK 100
Live Tooling Speed 10,000 rpm – Milling Spindle
Live Tooling Motor 30 hp – Milling Spindle
Tailstock (Yes/No) yes
Turret Capacity 12
ATC Capacity 120 Stations for Milling Spindle
Weight 61000 pounds
– OSP-E100L CNC Control
– Auto Tow Along Tail Stock
– 10,000 Rpm H1 Spindle
– 0.001° Degree B Axis (Positioning)
– Tool Offset Function 200 Sets
– Prep for Lower Turret Steady Rest
– SMW Slu-5 Hydraulic Steady Rest
– Slide Hold During Threading
– Lower “M” Turret
– Absolute Scale Xa, Za & Ys
– 0.0001 Micron Control
– Side Exit Conveyor
– Dnc-dt500
– Gauging Data Printout
– Auto Gauging
– Y Axis Gauging Function
– Harmonic Spindle Speed Control
– No Load Monitor
– One Touch IGF-XL for Macturn
– Rapid Traverse Override Switch
– Programmable Tailstock
– Tailstock Adv/Ret During Spindle Rotation
– Tailstock Thrust Hi/Low
– Prepped for 1000psi TSC for H1 Turret
– Robot Interface Type D
– Thermal Compensation Displacement (Tas-c)
– Chip Blaster Ev2000
– HI G Control

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products