• Okuma MCV-A2 – Year 2007

    Contact us for price

    Categories: ,

    Description

    Okuma MCV-A2 – Year 2007
    CNC Double Column Bridge Type Machining Center 4 Meters

    Condition:used
    Year:2007
    Cnc control:OSP P200M
    Width between columns:80”
    Travel, x-axis, table:157″
    Travel, y-axis, spindle head:78”
    Travel, z-axis, spindle quill:18”
    Dist. from spindle to table, min-max:0”—59”
    Size of table, width x length:60” x 162”
    Cutting federate:0.04” to 393” ipm.
    Rapid traverse rate:787” ipm.
    Spindle diameter:3.94”
    Spindle taper:BT 50
    Spindle speed range:30 to 4,000 rpm.
    Quill diameter:8.27”
    Tool stations:72
    Tool taper:BT-50
    Main motor hp.:25/30 hp. 30 minute
    Manuals:Yes, complete set
    Tooling:Minimal (may be more)
    Machine height:17” (6’ will come off when pendant is removed)
    Floor space:40’ Wide x 18’ Long
    Machine weight:86,900 lbs.

    The machine is under power and in GOOD TO VERY GOOD CONDITION.
    It was purchased to manufacture whip stock, which is an angular down hole tool that used to be used for offset drilling.
    Mud motors, directional drilling and MWD (Measure while drilling) made whipstock obsolete. It has been
    kept under power in an air conditioned and heated building.
    Ten years ago, new owners purchased the facility. The machine has not been used since the
    new owners purchased the facility. Last year Okuma come in and powered up the machine.
    The batteries were dead. They were replaced, parameters reinstalled and the machine cycled.
    OKUMA BRIDGE TYPE MACHINING CENTER MCA V2

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products