• OKUMA Space Center MA-400HA – Year 2003

    Contact us for price

    Category:

    Description

    OKUMA Space Center MA-400HA – Year 2003
    CNC Horizontal Machining Center
    Specifications:
    Travels:
    X-Axis Travel (column left/right) – 22.05″
    Y-Axis travel (spindle up/down) – 15.49″
    Z-Axis (table front/back) – 24.61″
    Spindle center to pallet top – 1.97″ to 25.98″
    Spindle nose to pallet center – 3.35″ to 27.95″
    Pallets:
    Work area – 15.75″ x 15.75″
    Indexing angle – 0.001″
    Max workpiece dimensions – 23.62″ x 27.95″
    Max load capacity – 880 lbs.
    Pallet change time – 7 secs.
    Spindle:
    Spindle speed – 50 to 15,000 rpm
    Taper bore – No. 40 (CT40)
    Feed rate:
    Rapid traverse XYZ – 2,362 ipm
    Cutting feed rate – 0.04 to 2,363 ipm
    Motors:
    Spindle (10 min/cont) – 35/25 hp
    Feed axis – 6.3 hp
    Table indexing – 4.1 hp
    ATC:
    Magazine capacity – 30
    Tool change time – 1.3 sec tool to tool
    Dimensions:
    Height – 108.62″
    Floor space, w x d – 95.04″ x 178.43″
    Weight, approx – 25,080 lbs.

    Equipped with:
    OSP -E100M Control
    Full B Axis
    15,000 RPM Spindle
    Plumbed for HP TSC (no pump)
    MOSDIC Coolant Filtration Chip Conveyor

    Machine in good operating condition at time of decommission. Was used to cut brass and well maintained.
    No tooling or fixturing is included. Removed at time of decommission.
    Seller can load by appointment only.

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products