Description
Perseo-Erie EDM Drillmate S26 For Small Hole EDM Precision Drilling – Year 2011
EDM Driller / Hole Popper
Fuzzy Programmable Control
New – December 2011
Work Table: 15.8″ x 23.6″
Work Tank with Plastic Guards: 15.7″ x 25.6″
Z-Axis Chuck Travel: 11.4″
Z2 Travel: 7.9″
X-Axis Travel: 15.74″
Y-Axis Travel: 11.8″
Track Type – Linear Guides
Work Piece Height – Maximum: 14″
Lowest Guide to Table with Back Slide Down: 1.9″
Electro-Guide Travel: 5.9″
Electrics: 220V/3Ph/60Hz
Machine Height with Z-Axis Raised: 89″
Machine Dimensions – Actual: 49″(L-R) x 59″(F-B) x 91″(H)
Weight – Approximate: 2,500 Lbs.
Dielectric System:
Fluid (Flush) – Water/EDM Oil
Pump – Pneumatic Pressure Pump
Reservoir – 5 Gallon
Filtration – 10 Micron
Auxiliary Flush – 110V
Power Supply Unit:
Peak Current Selections: 8 Steps
Voltage Selections: 3 Steps
Pulse On Time Settings: 1-30 Steps
Pulse Off Time Settings: 1-15 Steps
Drill/Sink Function: Switchable
Servo: 0-10 Steps
Electrode Sensitivity: 0-10 Steps
Capacitors: 5 Steps
Maximum Current: 75 Amps Peak
Gap Adjustment: 9 Steps
Power Supply Function:
Display: 15″ CRT/Full Color
Control Method: CNC Close Loop
Control Axes: X, Y, Z
Minimum Setting: 0.0002
Machining Parameter Sets: 7 Sets
Screen Pages: 10 Sections Per Set
Located in Bridgeport, CT 06607
Feel free to inspect
We can load this machine onto your truck or trailer for free
Sold as is where is
