POREBA TCG 125 x 4000 conventional heavy duty lathe.

LATHE in Very good condition after renovation in 2010
New electrical cabinet
Perfect bed, Quiet headstock, all ranges work
The machine is connected to electricity, so tests are possible,

Turning diameter over bed: 1250 mm
Turning diameter with carriage: 940 mm
Four-jaw chuck diameter: 1250 mm
Chuck working range min/max: 230/1050 mm
Distance between centers: 4000 mm
headstock
Spindle bore: 105 mm
Spindle seat: cyl. 105
Spindle diameter in the front bearing: 320 mm
Number of spindle speeds: 24
General spindle speed range: 1.6 – 315 rpm
Spindle drive motor power: kW 75
Maximum spindle torque: 63000Nm
Bed
Bed width: 1100 mm
Slide length: 1320mm
Support width: 550mm
Slide travel: 800 mm
Tool guide travel: 600 mm
Number of feed rates for each range: 20
General longitudinal feed speed range: 0.18 – 160 mm / rev
Longitudinal feed speed range at:
– large spindle speed range: 0.18 – 5 mm / rev
– middle spindle speed range: 0.18 – 40 mm / rev
– low spindle speed range: 0.72 – 160 mm / rev
General range of metric threads: 1-192 mm
General range of inch threads: 30 – 1/8 tpi
General feed rate range mm per minute: 11.2 – 320 mm / min.
Rapid longitudinal traverse: 4000 mm / min
Fast feed motor power: 4 kW

Tailstock:
Tailstock quill diameter: 280 mm
Tailstock spindle diameter in front bearing: 170 mm
Tailstock sleeve stroke: 200 mm
Rapid feed of the tailstock quill: 300 mm / min
Rapid feed of the tailstock along the bed: 1500 mm / min

Overall dimensions and weight:
Machine length: 9700 mm
Lathe width: 2200 mm
Lathe height: 1930 mm
Maximum workpiece weight in the chuck: 4 t
Maximum part weight in centers
– without support 30 t
– with one steady rest 35 t
– with two supports 40 t
Machine weight: 36 t