• QS Group SF-VF-22-13-06 Thermoforming Machine – Year 2007

    Contact us for price

    Category:

    Description

    QS Group SF-VF-22-13-06 Thermoforming Machine – Year 2007

    Max sheet length 2310 mm
    Max sheet width 1360 mm
    Forming depth 10 mm
    Total power requirement 76 kW

    Technical Sheet of Thermoforming Machine
    Model: SF-VF-22-13-06p
    Year 2007
    Brand: QS Group
    Status: For sale
    Delivery time: Immediately

    Description

    This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium productions of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum dimension of plates up to 2310 x 1360 mm. This is a machine in very good working order.
    • Maximum dimension of the plates: 2310 x 1360 mm
    • Thickness of the plates: up to 10 mm
    • Loading the plate and unloading the product: Manual

    Mold holder table:
    • Maximum stroke: 90 mm
    • Maximum mold height: 600 mm
    • Mold base height: 195 mm
    • Closing force: 27 kN
    • Contains: Stroke control with linear transducer, vacuum line for forming the part, water line for thermoregulation of the mold and air line for devices for critical demolding areas.

    closing frame:
    • Maximum plate: 2310 x 1360 mm
    • Maximum opening with manual loading: 650 mm
    • Closing force: 35 kN

    Cooling electric fans: 6 fans with a motor power of 0.55 kW each

    heating panels:
    • Upper panel power: 76.05 Kw
    • Resistors (ceramic): 117 of 650 W
    • Lower panel power: 46.8 Kw
    • Resistors (ceramic): 117 of 400 W

    counter-mold:
    • Maximum stroke: 1000 mm
    • maximum counter-mold height: 700 mm
    • Closing force: 12 kN

    vacuum installation
    • Tank capacity: 1300 l
    • Pump flow: 200 M3 / h
    • Motor power: 4 KW

    Air installation:
    • Operating pressure: 6 (+/-10%) bar
    • Maximum absorption (approx): 1100 Nlt/cycle

    Water installation:
    • Operating pressure: 2.5 (+/- %) bar
    • Consumption: 0.8 M3 / h

    Electrical installation:
    • Installed power: 150 Kw
    • Three-phase electrical voltage + neutral + earth: 400 (+6%-10%) Vac
    • Frequency: 50Hz

    Heating system control
    • Upper panel with regulation in percentage of each resistance.
    • Lower panel with regulation in percentage of each pair of resistors.

    Thermoforming cycles / software
    • Standard: formed negative/positive, with/without counter mold

    Safety protections and standards
    • Standard manufacturing and safety regulations. Directive: 89/336 – 98/37/CE – 73/23 – en 12409/2001 and EN 292 standard.

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products