Description
Richter PEKRS 80 – Year 1970
Eccentric Press 80 Ton
| Power in tons | 80 T |
| Table length | 900 mm |
| Table width | 650 mm |
| Ram stroke | 100 mm |
| Nbr of strokes/min | 70 |
| Distance between columns | 350 mm |
| Motor power | 8 kW |
| Richter PEKRS 80 | |
| Length x width x height | 1800.0 × 1250.0 × 2830.0 |
| Weight | 5700 kg |
Single column – eccentric press RICHTER type PEKRS 80
Year of construction 1970 – overhaul 2023
Pressure force 80 tons.
projection 350 mm
Table size 900 x 650 mm
Fall-through hole in the clamping table Ø 200 mm
Ram area 700 x 500 mm
Number of strokes 70 strokes/min.
Stroke adjustment 6 – 100mm
Ram adjustment 85 mm
Installation height max. 400
Clamping spigot hole Ø 50 mm
Table height above floor 810 mm
Motor power 8 kW
Mains connection 400 volts, 50 Hz
– Pneumatic clutch-brake combination ORTLINGHAUS
– Press safety valve HERION
– pneumatic ram balancing cylinders
– Overload protection with rupture plate in the ram
– Central grease lubrication with hand pump
Required space L x W x H 1800 x 1250 x 2830 mm
Weight 5.7 tons.
very good condition
Technically overhauled and rebuilt with new electrics to the latest UVV, completion 02/2023
– Upgrading the eccentric press to the latest UVV according to BGR 500, Chapter 2.3
– Control with plain text error messages and diagnostic screen for quick error localization
– new electrical cabinet mounted on the side of the machine
– completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7″ TFT touch display
– Two-hand control panel with emergency stop and engagement lock
– el. foot switch
– Cam switch mechanism with run monitor control
– Stroke triggering by press safety valve with pneumatic pressure compensator
– Rewiring of the machine
– Updated user manual
The machine is equipped with 6 operating modes:
1 = Setup
2 = single stroke two-hand
3 = single lift foot
4 = endurance foot
5 = auto. endurance run
6 = reverse run
