Description
Sharp SV-2414 A-F Mini Mill – Year 2022
CNC Vertical Machining Center
Condition : New
High Precision Box Way Vertical Machining Center
Standard Machine Specifications
Work Capacity
X axis travel: 610mm (24” )
Y axis travel: 355mm (14” )
Z axis travel: 460mm ( 18” )
Spindle nose to table: 70 – 530mm (2.8” – 20.9” )
Spindle center to column: 415mm ( 16.3” )
Worktable
Table area: 700 x 350mm ( 27.6” x 13.8” )
Max. work piece weight: 350kg ( 770 lbs.)
T-Slot (Number x Width x Pitch): 5x16x63.5(5×0.63×2.5)
Spindle
Spindle taper: Big Plus, CAT-40
Spindle speed: rpm 8,000
Spindle motor: cont. / 15 min: kw (hp) 7.5 /11 ( 10/15 )
Torque: Nm( ft/lb) 70(52) at 1500 rpm
Transmission: Belt Drive
Automatic Tool Changer
ATC type: Carousel
Tool capacity: 16
Max. Tool diameter: 93mm (3.7”)
Without adjacent tool: 150mm (5.9″)
Max. Tool length: 300mm (11.8″)
Max. Tool weight: 7kg ( 15.4 lbs)
Tool change time (tool to tool): 6.8 sec
Tool change time (chip to chip): 8 sec
Method of tool selection: Set tool Number
Motion
Rapid traverse: (mm/min (ipm)) X / Y/Z:20,000(787.4 ipm)Z:18,000 (708.7 ipm)
Cutting feed rate: (mm/min (ipm)) 1-10,000 (0.04–393 in / min )
Transmission: Direct drive
Positioning accuracy*: (mm (inch)) +/- 0.007 ( 0.0003” )
Repeatability accuracy*:(mm (inch)) +/- 0.003 ( 0.0001” )
Ballscrew diameter, pitch: (mm (inch)) 32(1.26″),10(0.4″)
X/Y/Z servo motor for Fanuc control: Kw( HP)1.2/1.2/1.8 (1.6/1.6/2.4)
Coolant System
Coolant tank capacity: L (gal) 160 ( 42 gal )
Number of Coolant Nozzles: 8
Machine Size
Floor space (w/o chip conveyor: W: 1850mm (72.8” ) x D: 1825mm (71.9”)
Height**: 2400mm (94.5″))
Weight: 2500kg (5500 lbs.)
Door opening: 740mm (29.2”)
Power Requirements
Electrical: 60 Hz 220 V / 3 Phase / 20 KVA
Air: 6 CFM @ 88 psi
* Proper foundation and environmental controls are required
** Overall height can be reduced to fit through most door opening by removing the “Z” axis motor.
Standard Accessories
Box Way Construction
CNC Control: Fanuc 0i-MF ( package 3)
Spindle: CAT-40 taper 8,000 rpm
Rigid tapping
Air blow (for cutting dry)
Air curtain (protect bearings)
Automatic Tool Changer:
16 tools, carousel style
Air blast at tool change
Coolant System:
42 gallon roll out coolant tank
Flood coolant system
Auto-Lubrication System with Alarm
Coolant gun
Air gun
Pull-out style Chip Pan
Heat Exchanger for Electric Cabinet
Fluorescent Work Light
Air Reservoir Tank with Alarm
3 Tier Status Light
Full metal enclosure with 2 large side doors
Tool kit
Leveling bolts and pads
