Description
SPINNER TTS-65-Triplex V1 CNC Turning Center – Year 2016
Manufacturer: SPINNER
Model: TTS-65-Triplex V1
Machine number: AV0247
Year of construction: 2016
Condition: reconditioned (used)
Operating hours: 10,500 h
Construction machine
SPINNER TTS-Triplex V1 simultaneous turning center
with two independent turrets
SPINDEL 1 up to 5,000 rpm – 65mm
Motor spindle with water cooling
with hydraulic hollow clamping cylinder, bar capacity 65mm,
Speed range 0-5,000 rpm
SPINDLE 2 (counter spindle) up to 7,000 rpm – 42mm
Motor spindle with water cooling
with hydraulic hollow clamping cylinder, bar capacity 42mm,
Speed range 0-7,000 rpm
SPINDLE FLUSHING Spindle 2
EJECTOR UNIT integrated in counter spindle
REVOLVER 1 and 3 : 12-station with CNC servo drive, top left
12 stations of the turret can be driven
Independent travel in X1 / Z1 / Y1 direction
REVOLVER 2 : 12-fold with CNC servo drive, bottom
12 stations of the turret can be driven,
Independent travel in X2 / Z2 direction
Tool holder on turret system BMT45
SIEMENS 840DE control system
– Contouring control with SHOPTURN BASIS user interface
– Rotatable control panel
– 19 ” color LCD screen
– Handwheel integrated in control panel
– 1 free USB interface
– Ethernet interface
– Siemens “turning” cycles for threading, deep drilling, chip removal, grooving
– Thread cutting without compensation chuck for central threads in the spindle center
SHOPTURN
3D-SIMULATION of the finished part
Tool monitoring via current consumption
“FORCE-CONTROL” – Moving to fixed stop
SPÄNEFÖRDERER as hinged belt conveyor exiting to the right
REFRIGERANT SYSTEM Tank volume 600 l, incl. high-pressure pump 80 bar back pressure
COOLING WATER TREATMENT via immersion cooler
MESSTASTER for tool measurement
UNIMAG interface for bar loading magazines
PARTS PICK-UP DEVICE for removing workpieces from spindle 2
incl collecting tray L=180mm Dmax = 65mm mounted on turret 2
incl storage shaft to the front of the machine
PARTS CONVEYOR BELT
STANDARD DOCUMENTATION GERMAN
consisting of machine manual and CNC manuals
supplied in digital form on the control unit.
STANDARD PAINTING two-colored in light grey RAL7035 and blue grey RAL5008
Electrical version EUROPA-STANDARD as follows:
Operating voltage 3x400V +/-10%
Mains frequency 50Hz (+/-2%)
TN mains (5-wire)
Collet chuck device Hainbuch 65 on spindle 1
Power chuck 140mm on counter spindle
The tool holders shown in the pictures are not included in the scope of supply.
