Takamaz XYT-51 CNC Turning Center – Year 2018

Contact us for price

Categories: ,

Description

Takamaz XYT-51 CNC Turning Center – Year 2018
BAR CAPACITY 2″
LIVE TOOLING Yes
Y-AXIS MILLING Yes
# OF TURRETS 2
MAX RPM 5,000 RPM
TAILSTOCK No

5,000 RPM;
18.5kw/30min;
A2-6 Spindle Nose;
51mm Bar

Capacity (Main – Fixed)

5,000 RPM;
9kw/30min;
A2-5 Spindle Nose;
(Sub Spindle, 42MM Hollow)

EQUIPPED WITH:

Iemca Barfeeder
FANUC 32-iB Controller
12 Station Independent Live Tool Turret (Main- X/Y/Z Axis)
(1/2 INDEX Turret) (BMT 45) Upper
12 Station Independent Live Tool Turret (Main- X/Z Axis) (1/2
INDEX Turret) (BMT 45) Lower
Hydraulic Chucking Cylinder
Chuck Clamp/Unclamp Sensor Confirmation
C-Axis Indexing
Air Blow Device, Front (Main and Sub Spindle)
Splashguard door with safety interlock
Signal tower light 3 colors (red, yellow, & green)
BASE MACHINE SPECIFICATION
Machine light (Internal)
Coolant system (405 lit.)
Preset Counter
Bar Feeder Interface
Pneumatic Part Ejector Unit (Sub-Spindle)
Unloader Unit
Out Parts Conveyor
Chip Conveyor (Right Side – Belt Type)
4) FACE Milling ER-20 Live Tool Unit
4) Cross Milling ER-20 Live Tool Unit
Spindle AIR PURGE
Tool Pre-Setter (Removable) MARPOSS (MIDA-ARM)
Spindle Orientation
OFFSET FACE Milling Live Tool Unit
OD Tool Holders 3/4″
Boring Tool Holders 3/4″
Cut Off Tool Holder
Tool Pre-Setter (Removable) MARPOSS (MIDA-ARM)
10) Round Hole Bushings
KITAGAWA B-206 3 Jaw Chuck
Spindle Orientation
Fanuc Options:
Direct Draw Dimension Programming
Inch/Metric Conversion
Run Hour and Parts Count
M Code Group Function
Simple Tool Life Management
Helical Interpolation
Made in Japan
2018 Takamaz XYT-51 CNC Turning Center W/ “Y” Live Tooling, Twin Spindle, Dual Turrets and an Iemca Barfeed. Machine is in excellent condition with very low run time. Customer bought machine for a job…ran prototype parts….then didn’t get the job. Head 1 has 2397 hours and head 2 has 1100 hours.

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products