• TAKUMI SEIKI V11A – Year 2001

    Contact us for price

    Category:

    Description

    TAKUMI SEIKI V11A – Year 2001
    CNC Vertical Machining Center

    Four (4) Box – Slideway System Eliminating Overhang For Maximum Table Support
    * Hardened And Ground Box Way Construction For Superior Rigidity
    * Large 1.97. Ballscrew Diameter
    * 6,000 RPM Spindle Yields A Combination Of Speed And Torque Well Suited For A Broad Range Of Machining Applications
    * A Standard Spindle Oil Cooler System Maintains Constant Temperature Throughout The Spindle Housing
    * Swing Arm Cam-Type Automatic Tool Changer Has A Quick 2-1/2 Second Tool Change Time

    SPECIFICATIONS:

    * Ball Screw Diameter 1.97 in
    * X-Axis Travel 43 in
    * Y-Axis Travel 22 in
    * Z-Axis Travel 25.6 in
    * Table Size 53 in x 20 in
    * Spindle Center To Column 22 in
    * Spindle Nose To Table 5.9 in – 31.5 in
    * Table Load 1,760 lbs.
    * T-Slots .7 in x 5 in x 3.94 in
    * Spindle Cat 40

    SPECIFICATIONS: (CONT.)

    * Spindle Speed 60-6,000 RPM
    * Spindle Motor 15 Hp
    * Rapid Travel:
    * X-Axis 472 IPM
    * Y-Axis 472 IPM
    * Z-Axis 394 IPM
    * Cutting Feed Rate:
    * X-Axis 236 IPM
    * Y-Axis 236 IPM
    * Z-Axis 236 IPM
    * Feed Increments:
    * X, Y, And Z 0.0254 in
    * Accuracy:
    * X,Y, And Z-Axis Repeatability * 0.00019 in
    * X,Y, And Z-Axis Positioning * 0.0001 in
    * Ball Screw Class C-3
    * Tool Changer:
    * Capacity 24 Tool (Arm Type)
    * Type Cat 40
    * Tool Weight Max 17.6 lbs.
    * Tool Diameter Max 3.55 in
    * Tool Diameter Max (Adjacent Pot Empty) 7.1 in
    * Tool Change Time 2-1/2 Seconds
    * Weight And Dimensions:
    * Net Machine Weight 16,500 lbs.
    * Floor Space 143.4 in W x 108.4 in H x 131.6 in L
    * Electrical Requirements:
    * Voltage 220-Volt
    * Transformer May Be Required For Voltages
    Under 200 Or Over 230
    * AC/3-Phase 20KVA/50A
    * Air Requirement 85 PSI

    STANDARD EQUIPMENT:

    * Spindle Oil Cooler
    * Coolant System
    * Tool Box
    * Air Blast Device
    * Rear Spiral Conveyor And Flush Coolant
    * Front Spiral Chip Conveyor
    * MPG Box (Manual Pulse Generator)
    * Fully Enclosed Guarding

    STANDARD EQUIPMENT:

    * CE Specifications (Meets International Industrial Safety Standards)
    * Heat Exchanger For Electrical Cabinet
    * Rigid Tapping
    * RS-232 Interface
    * 160 Meters Memory

    ACCESSORIES INCLUDED:

    -CNC-170 6.6 in CNC 4th Axis Rotary Table With Tailstock
    TAKUMI SEIKI
    Model V11A CNC Vertical Machining Center With
    Mitsubishi 520AM CNC Control, 15Hp, 220-Volt, 3-Phase, 60Hz S/N G08022, 2001 Year Model

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products