The TCI Cutting BP-C 4020-1 machine includes the following elements:

• Structure of the machine that includes the cutting table and a bridge with a cutting head for
abrasive and pure water cutting.
• Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a
new generation multi touch screen.
• Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0
• Automatic abrasive quantity regulator, independent for each cutting head, controlled from the
design software. TCI ABRASIVE 3.0
• Abrasive backstop system TCI CUT CONTROL 3.0
• High pressure pump KMT oem 50 HP SL-VI · 4000 bar · 1L with:
– Hydraulic pump of variable flow and compensated pressure
– High / low pressure selection that allows piercing
– Electrical inversion of the cutting head
– Noise level below 80dB
– Leakage detection in de high-pressure circuit
– Long lasting high pressure seals
– System to uninstall de piston without uninstalling the cylinder
– Air / oil heat exchanger
• Installation of high pressure tubes
• Human machine interface TCI SMARTTOUCH V6.0
• Communication system to communicate between the machine and TCI
• CAD/CAM software and Postprocessor Lantek Expert 2D with autonesting
• Machine safety system. Declaration of conformity and CE marking
• Anti collision system TCI COLLISION PROTECTION 2,0
• Height contol system TCI SRA 3.0

Included special accessories:
• Water softener TCI HIDROSYSTEM 2.0 (2-3-shift)
• Oil/water chiller (closed circulation)
• Slit clearance TCI EXTRACTION SYSTEM 2.0 4020
• Proportional control valve KMT 50 HP OEM
• connecting kit plasma head with 2D water cutting head
• plasmasource Thermal Dynamics Ultracut 200XT + torch (automatic gas console)

Plasma cutting capacity:

The cutting system XY

• A frame built with structural steel profiles, for a working range of 4000mm in the x axix
• Water tank with material supports and water level regulation, constructed from stainless steel
sheets.
• An axis with a guided system on a bridge independent from the cutting table (X axis) consisting
of a set of high precision skates and guides. This system provides a reliable linear transport,
ensures a high rigidity, a minimum of frictional resistance and a high load capacity. The
entire assembly is driven by a rack system / Precision reducer, which guarantees maximum
performance, which is connected to a brushless AC motor.
• The transverse linear axis (Y axis) mounted on the linear axis X uses the same system
described in the previous point.
• A nozzle support head (Z axis) is provided with a vertical guide system. Includes automatic
adjustment of cutting height.
• One long lasting nozzle, with orifice and pneumatic jet control valve.
• Control panel integrated in the control cabinet to manage the machine.
• Pushbuttons for autimatic operation with emergency stop.