• TRENS SN50C – Year 2019

    Contact us for price

    Category:

    Description

    new TRENS SN50 C lathe.
    The machine can be inspected under power

    BASIC VERSION
    – Metric version
    – Spindle end bayonet B6 (DIN 55027 & ISO 702-III)
    – Bore of the spindle Ø 52 mm
    – Four-sided tool head
    – Operating the lock case on the right
    – with fast feed
    – tailstock
    – Main engine power 4.0 kW
    – chip container + cooling
    – LED lighting
    – Power supply cable armoured hose
    – fixed handle for axis X
    – fixed handle for axle Z
    – Chuck cover Ø 200 mm with limit switch
    – CE version: front hood against chips, rear hood, lead screw protection and pull rod
    – Colour – RAL 7035-3 / 7016-3 / 6153
    – Set of change gears for thread cutting
    – Shear pin 3 pieces
    – set of tools
    – Operating manual of the machine on CD, documentation
    – fixed tip Morse 5

    On request, we can add a digital display and a Multifix holder.
    Please contact us for this.

    Technical data
    WORKSPACE:
    – Swing diameter over the machine bed: 500 mm
    – Swing diameter over the support: 270 mm
    – Swing diameter at breakout: 700 mm
    – Swing diameter in the breakout 670 mm
    – useful length of the breakout from the front of the spindle end: 230 mm
    – centre distance: 1000 mm
    – centre height above the machine bed: 250 mm
    – machine bed width: 340 mm

    SPINDLE:
    – Speed range: 22 – 2000 rpm
    – Speed steps: 24
    – Spindle end: ISO 702/III – B6 (optional ISO 702/II – D6)
    – spindle bore: 52 mm
    – Inner cone: Morse 6
    – Max. Torque / limiting speeds: 1200 Nm / 45 rpm

    SUPPORTS:
    – Working range of the cross slide: 300 mm
    – Working range of the tool slide: 140 mm
    – Max. knife dimensions: 32 x 20 mm
    – Number of feed steps: 38 mm
    – Range of longitudinal work feeds: 0.05 – 6.4 mm
    – Range of the working feeds crosswise: 0.025 – 3.2 mm
    – rapid longitudinal feed: 3000 mm/min
    – fast cross feed: 1500 mm/min
    – Swivel angle of the tool slide: +/- 90

    RIDDLER:
    – Diameter of the centre sleeve: 70 mm
    – Stroke of the center sleeve: 180 mm
    – Inner cone of the tip sleeve: Morse 5
    – transverse adjustment: +/- 12 mm

    THREADS:
    – Metric thread: 29x / 0.5 – 40 mm
    – Whitworth thread: 35x / 1 – 80 mm
    – Module thread: 26x / 0.25 – 20 mm
    – Thread Diametral Pitch: 31x / 2 – 72 DP

    DRIVES:
    – Total power consumption: 6,6 kW
    – Power of the main drive motor: 5.5 kW
    – Cooling pump capacity: 0.09 kW
    – Power of the rapid feed motor: 0.55 kW

    DIMENSIONS:
    – width x height: 1.100 x 1.580 mm
    – length/weight: 2640 mm / 1753 kg
    – voltage: 400V

    Shipping Policy

    After paying 49 GBP £ 
    You can learn its price now
    Pay on PAYPAL 
    PayPal Acceptance Mark         or  Wire  Transfer  or   Credit Card

    Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

    Our Service Terms : 
    1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
    2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
    3.) We are not a stocking dealer of New & Used Metalworking Machinery.
    We are an online technology company about used CNC Machine Tools & Machinery sector.
    Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
    The stocks of our partner machine dealers are always changing!
     The stock status of the machines varies instantaneously!
    4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
    5.) Our aim is to inform you about the market value of the machine you are looking for.
    If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
    6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
    7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
    8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

    Related products