Description
Tschudin HTG310 – Year 1992
UNIVERSAL CYLINDRICAL GRINDER
SWISS SUPER-PRECISION
MODEL: HTG-310 S/N: 31532 NEW: 1992
TABLE:
SWING OVER TABLE ………….. 8″
DISTANCE BETWEEN CENTERS …… 13.4″
TABLE SPEED ………………. 0 TO 195″ IPM
SWIVELLING RANGE ………….. +/- 11 DEGREES
WHEELHEAD:
WHEEL SIZE ……………….. 14″DIA. X 2″W X 5″BORE
SWIVELLING RANGE ………….. +/- 5 DEGREES
MOTOR ……………………. 4 HP
RAPID APPROACH ……………. 1-1/2″
INFEED-AUTOMATIC ………….. 0 TO .050″ ON DIA.
INFEED SPEED, MAXIMUM ……… 1.2″/MIN.
SPARKOUT …………………. 2 TO 30 SECONDS
WORKHEAD:
SPINDLE TAPER …………….. #5MT
SWIVELLING RANGE ………….. 360 DEGREES
INF. VAR. SPINDLE SPEEDS …… 50 TO 500 RPM
TAILSTOCK:
TAPER OF CENTER BORE ………. #3MT
TRAVEL OF CENTER ………….. 0.8″
APPROXIMATE WEIGHT ………….. 4,000 LBS
STANDARD FEATURES/ATTRIBUTES:
TSCHUDIN HYDRODYNAMIC TYPE CYLINDRICAL BRONZE TO
STEEL BEARING WHEELHEAD DESIGN
SIMPLE ONE-KNOB CONTROL INITIATES ALL THE SETTINGS
FOR TRAVERSE & PLUNGE GRINDING CYCLES
HYDRAULIC OPERATION FEATURING:
-POWER TABLE TRAVERSE
-AUTOMATIC INFEED
-PLUNGE INFEED
-RAPID WHEELHEAD ADVANCE AND RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD WORKHEAD SPINDLE
A .00002″ GRADUATED DIAL SETS POSITIVE STOP DIAMETER
3/60/230-460 VOLT ELECTRICS
EQUIPPED WITH:
DUAL RATE AUTOMATIC PLUNGE INFEED OPTION,
“COARSE” & “FINE” CYCLE FEED OPTION
COOLANT SYSTEM WITH PAPER FILTRATION
(2) ADDITIONAL GRINDING WHEEL HUBS, WITH GRINDING WHEELS
CENTER IN WORKHEAD
WORKHEAD SPINDLE IS A LARGE TAPER, No. 5 MT. THIS ALLOWS ONE
TO USE A 5C COLLET WITH AN ATTACHMENT THRU THE SPINDLE,
EITHER A DRAW BAR OR A QUICK ACTING LEVER TYPE UNIT.
MACHINE MANUAL
WHEELHEAD MOTOR, 3 KW (4 H.P.), 3/60/230-460 VOLTS
MACHINE IS PRESENTLY WIRED FOR 3/60/460 VOLTS
MADE IN GRENCHEN, SWITZERLAND
ORIGINAL & BEAUTIFUL – EXCEPTIONAL CONDITION & APPEARANCE
INSPECT UNDER POWER
Y.O.M.1992, AUTO CYCLE, OD GRINDER, HYD. TABLE/AUTO INFEED/AUT
