Vernet Behringer FP 600 CNC Beam Drilling Line – Year 2000

Contact us for price

Categories: , ,

Description

Vernet Behringer FP 600 – Year 2000
CNC Beam Drilling Line

23.6” X 13.4” CAPACITY CNC 3 SPINDLE CNC BEAM DRILLING LINE WITH PC BASED CNC CONTROLLER, 43’ INFEED, 25’ POWERED OUTFEED, 40’ FRONT CONVEYOR AND (3) 200-800 DRILLING SPINDLES.

GENERAL SPECIFICATIONS
MANUFACTURER: VERNET BEHRINGER
MODE: FP600 CNC
YEAR OF MANUFACTURER: 2000

CAPACITIES:
SECTIONS: 23.6″ X 13.4″
ANGLES: 1.9″ – 11.8″
IPE/IPN (FLANGES): 3.1″ – 23.6″
HEA/HEB: 3.9″ – 31.5″
FLAT BARS: 3/8″ X 4 MIN. / 3/4″ X 23 5/8″ MAX
SPINDLES: 3 (2 HORIZONTAL & 1 VERTICAL)
SPINDLE TAPER: SAE 40
SPINDLE HP: 7.4
MAX. DRILL DIAMETER: 1.4″
ROTATION SPEED: 200 – 800 RPM
SPINDLE STROKE.: 11.8″
CARRIAGE MAX. SPEED: 196.5 FT/MIN

INFEED: 43′ OF IN FEED STROKE WITH 40′ OF CONVEYOR
OUTFEED: 25′ OF MOTORIZED EXIT CONVEYOR
SAFETY DEVICES: LIGHT CURTAINS FOR FRONT AND REAR OF DRILLING AREA
DRILLING FEEDS: ADAPTIVE FEED-AUTO TRANSFER FROM FAST TO WORKING SPEED

WORKHOLDING: HYDRAULIC DOUBLE ACTING VICE W/HORIZ.AND VERT. CLAMPS

CONTROLLER: CNC NUMERICAL CONTROL,
8 MG RAM,
HARD DISK, 3.5″ FLOPPY DISKS, PART NESTING OPTIMIZATION,
BAR LENGTH MEASUREMENT, SPARE TIME PROGRAMMING,
14″ MONITOR, KEYBOARD, RS 232 INTERFACE,
DNC LINK
VOLTAGE: 460V/3/60

INCLUDES: PC BASED CNC CONTROLLER,
43’ INFEED, 25’ POWERED OUTFEED,
40’ FRONT CONVEYOR AND (3) 200-800 DRILLING SPINDLES,
LIGHT CURTAINS FOR FRONT AND REAR OF DRILLING AREA,
ADAPTIVE FEED-AUTO TRANSFER FROM FAST TO WORKING SPEED,
HYDRAULIC DOUBLE ACTING VICE WITH HORIZONTAL AND VERTICAL CLAMPS,
CNC NUMERICAL CONTROL WITH PENTIUM PC,
8 MB RAM,
HARD DISK,
3.5″ FLOPPY DRIVE,
NESTING OPTIMIZATION,
BAR LENGTH MEASUREMENT,
SPARE TIME PROGRAMMING,
14″ MONITOR,
KEYBOARD, RS 232 INTERFACE,
DNC LINKING,
MISC MANUALS AND SPARE PARTS

Shipping Policy

After paying 49 GBP £ 
You can learn its price now
Pay on PAYPAL 
PayPal Acceptance Mark     or  Wire  Transfer  or   Credit Card

Machine Request  I Sell Machine  I  Guest Post    I   Stock Machines

Our Service Terms : 
1.) CNCBUL.com does not own any of the equipment listed for sale on this site!..
2.) All information, offers and prices on this site are subject to change by the Machine owner and are non-binding!
3.) We are not a stocking dealer of New & Used Metalworking Machinery.
We are an online technology company about used CNC Machine Tools & Machinery sector.
Our Machine Dealer Partner companies are a stocking dealer of New & Used Metalworking Machinery. 
The stocks of our partner machine dealers are always changing!
 The stock status of the machines varies instantaneously!
4.) Machine Price information learning fee is limited to only 1 machine . It does not cover all machines in the system!..
5.) Our aim is to inform you about the market value of the machine you are looking for.
If the machine for which you requested the price has been sold, offers of machines with the same features or equivalent are sent to you by our International Machine Dealer partner companies as a separate offer.
6.) After the payment is received, the machine price information is sent via  email or Whatsapp as PDF format.
7.) Machine price information transmission time is between 15 minutes and 6 hours. This period varies according to the demand for proposals, working hours, days and hours.
8.) You can enter your company’s billing information in the ‘Note to Seller’ section when making the payment.

Related products