Description
WALDRICH COBURG GM 20/10 – Year 1978
Planer Milling Machine
The machine is formed of the following main assemblies: a bed with two movable tables, a fixed bridge (two columns on each side of the beds, a cross-rail and a cross-beam) and two heads (a milling head on the right side and grinding head on the left side).
The heads displace on the cross-rail guideways. Inside of each head the ram is guided with the main spindle. The movable tables can be fixed between them with screws (as a single-table), but one of them can independently works from the other.
Three metallic telescopic covers (two fixed on external ends of the tables and one between tables) protect bed guideways.
Total table 1 length 9550 mm
Available table 1 length 9000 mm
Total table 2 lengths 6550 mm
Available table 2 lengths 6000 mm
Total table length (as a single-table) 16100 mm
Available table length (as a single-table) 15000 mm
Tables width 3200 mm
Table travel on bed guideways 15000 mm
Cross-rail travel 3500 mm
Milling heads travel on cross-rail 5000 mm
Rams vertical travel 1000 mm
Milling (right) spindle speed range
(on 3 steps) 3 ÷ 355 rpm
Grinding spindle (left) speed range
(on 2 steps) 700 ÷ 2500 rpm
Milling heads feeds 0 ÷ 3000 mm/min
Rams feeds 0 ÷ 2000 mm/min
Table feeds 0 ÷ 6000 mm/min
